Contact Us
TEL: +86-0571-57182866
Mobile & Whatsapp: +86 13968170095
Skype: kangson1226
E-mail: Kangson1226@kinzip.com.cn
Address: No.3, Linyong Road, Linpu Industrial Park, Xiaoshan, Hangzhou, Zhejiang, China
Home > Knowledge > Content
What is a roof panel and what is the thickness of the roof panel?
Jun 29, 2018

What is the roof paneling problem is still unfamiliar to many of our friends, but each type of building materials is designed to make our life more comfortable and convenient. Therefore, our friends can refer to the small series before selecting construction materials. The information on the thickness of the roof plate and what is the roof plate problem, then all the friends and Xiaobian together to see the relevant information.

First, what is a roof panel?


Roofing panels are not roofs, they are only part of the roof. It is the structural layer of cast-in-place or prefabricated panels. It is the top surface after the waterproof layer is finished on the structural surface. The building roof is more than the waterproof surface layer of the structural roof. Learn more>>


Second, what is the thickness of the roof?


Roof thickness and reinforcement must be determined by calculation. Small to take 100mm can be. Please note that if there are more tubes or larger diameter tubes in the roof panel, it is recommended to consider increasing the thickness appropriately.


1. Light weight; aluminum density is 2.73g/m3, only 1/3 of steel.


2. High strength; High strength can be achieved by means of composition, processing and heat treatment.


3. Corrosion resistance; With self-anti-rust ability, the formation of the oxide layer, can prevent oxidation of metal corrosion, good acid and alkali resistance.


4. The surface treatment is various and beautiful. Can be anodized, electrophoretic, chemical treatment, polishing, paint treatment.


5. Good plasticity, easy processing;


6. Good electrical conductivity. Non-magnetization and low spark sensitivity to prevent electromagnetic interference and reduce flammability in special environments.


7. Easy to install; aluminum metal can be riveted, welded, glued and other ways to connect.


8. Environmental protection, 100% recycled. Learn more>>


Third, roof panel waterproof engineering:


Roof waterproofing projects generally include roofing membrane waterproofing, roofing membrane waterproofing, roofing rigid waterproofing, tile roofing waterproofing, roof seam sealing and waterproofing. Waterproofing on roofs is prohibited during rainy days, snow days, and high winds above Grade 5. The conditions for the construction of the ambient air temperature are compatible with the waterproof material used and the construction method.


To fundamentally solve the problem of seepage of water in roofs of existing buildings, it is necessary to proceed from the aspects of design, construction, materials, management, and maintenance of the waterproofing works, and carry out system management and comprehensive prevention and control. In order to improve the quality of waterproofing projects and prevent leakage, we will start from construction, strictly control the quality of materials, improve design standards and strengthen management, and adopt specific measures for comprehensive prevention and control.


Previous: Which wall plate should be installed first?

Next: Color steel sandwich panel thickness specifications